- Our Price
- from £74.00+VAT each (£88.80)
(£88.80 inc. VAT)
The Blanchon Initial is an odourless water-based PU wood floor lacquer that will enhance the beauty of light wooden floors, without changing their original colour.
With excellent build properties, and based on the latest technology, Initial can be used to lacquer any type of wooden flooring that has been properly prepared - whether this be in a living room, bedroom, staircase etc.
Blanchon Initial is available in either a satin, matt or ultra matt finish.
10m2 per litre per coat
Old or new wood should be sanded to obtain a smooth even surface. Begin by sanding to bare wood with 24 or 36 grit, then with 50 or 60 grit and finish with 100 or 120.
All traces if dust should be removed.
The wood floor must be perfectly clean and dry.
Shake well before use.
Do not lacquer if the temperature is lower than 12°C, or if the relative humidity is higher than 85%. Do not use on wood with a moisture content above 10%.
Three even and generous coats should be applied with a special varnishing roller, graining brush or brush for edges/small areas - or apply 2 coats onto your chosen primer.
Once the first coat has dried, a light sanding is recommended with a buffing machine (fine sanding disc) before removing all traces of dust. Sanding is essential if more than 24 hours has elapsed between coats.
Under normal conditions approximately 2 hours 30 minutes should be left before sanding/recoating.
Dust should be removed regularly using a vacuum cleaner or a dustpan and broom.
Occasionally mop the surface using a damp mop. Stains can be removed with the Blanchon Lagoon, Blanchon Cleaner Lisbril or a neutral detergent - following manufacturers recommendations for concentrations.