Burford Doors
- Our Price
- £265.00+VAT each (£318.00)
CALL US
Looking for advice or to place an order for this product?
Call us now on: 01538 304 584
...or send us a message.
| Our Price | from £340.00 + VAT | |
|---|---|---|
| Available Widths | 2'3", 2'6", 2'9" (686mm, 762mm, 838mm) | |
| Height | 6'6" (1981mm) | |
| Finish | Unfinished | |
| Ledges | Square | |
| Ledge Thickness | 40mm | |
| No. Of Ledges | 4 | |
| Boards | Beaded, Undulated | |
| Species | European Oak | |
| Thickness | 20mm | |
| Form | Kit Form £340.00+VAT | Assembled £380.00+VAT |
The Burford Solid Oak Doors combine aspects of both our Yorkshire and Hartington styles of solid oak door.
Each Burford door features our popular undulated surface texture across the face - producing a worn, wave effect. In-between each of the boards is a large bead detailing.
To the reverse of the door there are four individual block ledges, fitted by means of screw and plug.
Like all of our styles of solid oak ledge doors, the Burford doors are supplied unfinished and available in either a kit form or ready assembled form.
Assembly
Solid Oak Ledged Doors should not be glued or clamped.
More Information
Introduction Some of you choose to order your oak ledged doors in kit form and the following guide shows the typical assembly process. We got a skilled joiner to build up this door and some of his tips and wisdom are passed on here. An oak ledged door kit would usually take him between 25 and 30 minutes to complete - you may wish to allow a little longer! ( To download a printable pdf version of this guide, click here ) What You Will Need Level workbench with 2 or 3 softwood battens to rest the door planks on Tape measure Nylon hammer/mallet Steel hammer Screwdriver (quicker and easier with an electric screwdriver) Sharp 1 inch chisel PVA glue Steel cabinet scraper OR 120 grit sand paper and a sanding block 1. Unpack Door Components Remove the cellophane wrapping from the door kit and check that you have: 5 x oak door boards 4 x...
Introduction As many of you will already have seen, we have a guide available on How To Assemble An Oak Ledged Door . Once the door is assembled the next step is of course fitting the oak door into place. This step by step guide outlines the sequence for fitting an oak ledged door with wrought iron T-hinges and a Suffolk latch ( To download a printable pdf version of this guide, click here ) What You Will Need Assembled Oak Ledged Door Suffolk Latch & Hinge Set Spirit Level Screwdriver Screws Handsaw Plane Hand Drill 1. Install Door Frame Before you begin to fit your oak door, you need to ensure that the door casing or frame is perfectly perpendicular and square within the opening. Get this wrong and you will plant the seeds of much strife later on - you have been warned! 2. Measure The Door...
