- Our Price
- From £21.00+VAT (£25.20)
(£25.20 inc. VAT)
Fitting solid oak flooring has always been a skilled and time consuming job.
These days, screwing through the floor board tongue is the preferred method, which usually means drilling pilot holes to prevent splitting the wood with the screws.
Thankfully, those days are over.
These fabulous screws from Spax are designed specifically for fitting solid wood flooring.
It will take you half the time to lay each board as no pre-drilling is required.
You won't split the wood as the screw goes in - the CUT narrow head means you can even pause with the screw half way in!
Your screwdriver's batteries will last longer as the screw countersinks with minimum pressure.
You won't have to wait for the screw to "bite" - its ground serrations grip immediately.
The screws wont rot in the oak - they're galvanised and yellow passivated.
Every box of screws comes with a dedicated bit for your drill or screwdriver.
Dimensions 3.5 x 45 mm + 3.5 x 55 mm
T-STAR plus T10 torque transfer
Flat head with ribs underneath
Galvanised, yellow passivation
500 pcs per packing unit
Screwdriver bit included